| Main > Main Forum |
| What's the best way to install a PC monitor in this CAB? |
| << < (3/3) |
| Jabba:
I am looking at either a 17" or a 19"... Why do you ask? |
| Raven..:
Just curious mostly. Both of those will have a tube size smaller than an arcade monitor (a 21" is the same size as a 19" arcade monitor), so you want to make sure that you center it up well and secure the sides. |
| paigeoliver:
I have one of those in the basement (mine was a Berzerk, so it has a front door). I was considering shoehorning a big 25" or 27" monitor in vertically. |
| Stingray:
Mine sits back at a pretty extreme angle too. I took a PC monitor out of it's case and found that it had a metal lip around the outside edge that's about 1/2 inch wide. The monitor slipped right into the hole vacated by the dead arcade monitor that was in my cab when I bought it and I just screwed it into place. Here's a not very good picture of the cab when it was still very much a work in progress. -S |
| Navigation |
| Message Index |
| Previous page |