Main > Main Forum
Metal Panels for Atari Cocktail Cabinet
Kremmit:
Oops, almost forgot to check back on this thread. I'll try to dig those out and get you some measurements this evening.
Goz:
If it doesnt pan out with Kremmit I might have a couple of brushed steel control panels that were custom made a while back. What sort of holes do you need? I have one panel configured for fighters and one for trackball games.
-Goz
kastawaykid:
I really was looking for either blank or fighter. The Tempest ones also would be nice, I could make them swappable. Do you have two Fighter ones that would fit an Atari Cocktail cabinet? Let me know. Thanks for the response.
Goz:
I have a 15" Midway style that is blank that was intended to be a 3rd control panel. This could be cut down to make to control panels.
PM me if interested.
-Goz
Kremmit:
Didn't find 'em till tonight, but I've got 'em now.
Each control panel is 15 3/16 inches wide. They're about 2 3/8 inch thick, but they're hinged , so they can be opened or shut to make them a bit thicker or thinner depending on how far apart your mounting holes are. The useable control surface is 7" front to back, but the leading edge of the panel will stick out about another 3/4 inch, if it matters.
The overlays have some cracking/wear, but are still pretty good.
Here's a pic- sorry about the quality, I had to take stills with my video cam. My new digital still cam should arrive tomorrow, according to FedEx.com, so if you're still interested, PM me and I'll take you some better shots. And let me know if you need any other measurements as well.
(Pic shows spinner & buttons, but I'm keeping those. I will leave the wiring & molex underneath, though.)