| Main > Main Forum |
| Racing games with shifters question |
| << < (4/6) > >> |
| Minwah:
--- Quote from: Silver on December 31, 2004, 10:11:33 am ---Yes I don't believe there are any games that can not be played with a 4-way shifter (and a turbo button) --- End quote --- I have just mad ea 360degree wheel + 4-way (Atari) shifter panel and configured it for all 360deg driving games. I can say that the shifter works fine for all these games (with official MAME) except dirtfoxj, which uses an up/down semi-automatic-style shifter. For this I just use 2 buttons instead. For toggle-style shift games, I have mapped all 4 inputs from the shifter to the 'gear shift' input in MAME, with the intention 1st/3rd are low, and 2nd/4th are hi. The only downside to this is that hi/lo may be in different place each time, depending on the position of the shifter - as long as you bear this in mind it isn't much of a problem. The shifter works fine for 4-speed games (of course) and also the ChaseHQ style hold-down-an-input-to-stay-in-lo shifter. One random problem I have found is that my IPAC shift key doesn't work properly with a gear selected (input constantly down), I have to move the stick into neutral - again no biggie. |
| Hoagie_one:
thats good news. I just need a good shifter then |
| Hoagie_one:
anyone have any experience with this happ 4 gear shifter? http://www.happcontrols.com/driving/50849600.htm |
| Kremmit:
--- Quote from: Minwah on January 01, 2005, 02:06:26 pm --- --- Quote from: Silver on December 31, 2004, 10:11:33 am ---Yes I don't believe there are any games that can not be played with a 4-way shifter (and a turbo button) --- End quote --- I have just mad ea 360degree wheel + 4-way (Atari) shifter panel and configured it for all 360deg driving games. I can say that the shifter works fine for all these games (with official MAME) except dirtfoxj, which uses an up/down semi-automatic-style shifter. For this I just use 2 buttons instead. For toggle-style shift games, I have mapped all 4 inputs from the shifter to the 'gear shift' input in MAME, with the intention 1st/3rd are low, and 2nd/4th are hi. The only downside to this is that hi/lo may be in different place each time, depending on the position of the shifter - as long as you bear this in mind it isn't much of a problem. The shifter works fine for 4-speed games (of course) and also the ChaseHQ style hold-down-an-input-to-stay-in-lo shifter. One random problem I have found is that my IPAC shift key doesn't work properly with a gear selected (input constantly down), I have to move the stick into neutral - again no biggie. --- End quote --- I always forget to look for software fixes... It's just so much more fun to make it into a big complicated hardware hack instead! ::) |
| Xiaou2:
How do you map the buttons to 'change gear' ? Im using mame32 - but anyways... Im guessing it has something to do with ctrl.ini - and for some reason seems a bit too painfull to even look into messing with. Tia |
| Navigation |
| Message Index |
| Next page |
| Previous page |