| Main > Main Forum |
| Spiral Saw or Router?? |
| << < (3/4) > >> |
| Beeeph:
--- Quote ---I just finished my cab and I'd have to say the three most important tools I had were 1. Circular Saw, 2. Cordless Drill and 3. Router. --- End quote --- I concur! |
| DrewKaree:
Get the router. It's better suited to what you're doing. Anyone here build kitchen/bathroom cabinets? Tell him what you'd use for buidling cabinets. You will NEVER walk into a cabinet factory or onto a remodeling jobsite and see someone building a cabinet with a rotozip. You are building a "kitchen" cabinet, albeit one that will never be hung on a wall or used to store dishes (unless you're a COMPLETE slob, in which case you should have Murray the cop come and arrest you). There's a saying about using the right tool for the job. The router is the right tool for this job. The rotary saw will work, but it is not the right job. I can cut a tree down with a circular saw too, but the chainsaw is better suited to the task. Use the right tool for the job. Don't give that rotary saw a second thought, go buy the router. When looking at routers, try to buy one that has both a 1/4" collet AND a 1/2" collet. You'll thank me later when you want to use your router for a project and you find they don't make the bit you want with the smaller shank. There's a reason it only comes in the bigger shanked model. |
| clanggedin:
If I pick up a router will 1.5HP be enough? Should I spend the extra $$ and get a 2HP? |
| DrewKaree:
The horse and a half will be fine for your cab, the 2 horsey is nicer in the long run. Do you need the extra half a horse? No. I'd still want the 2 horse, though :) |
| Tailgunner:
--- Quote from: clanggedin on December 28, 2004, 11:12:35 am ---If I pick up a router will 1.5HP be enough? Should I spend the extra $$ and get a 2HP? --- End quote --- Unless you'll be building your cab out of rock maple, don't bother. |
| Navigation |
| Message Index |
| Next page |
| Previous page |