| Main > Main Forum |
| Im new here Please Help |
| << < (4/5) > >> |
| dabone:
Try removing the board from the game, and reseating it, time killers if I remeber has 3 boards that interconnect to form the game. Also, have you checked the voltage yet? Get as copy of the jamma pinout here :: http://www.coin.demon.co.uk/jamma.htm Get a digital multimeter. (Cheap, just look at sears or your local hardware store) Set it to measure dc, then connect the black lead to ground and the red lead to +5 on the jamma harness right by the board. If it's low there is a small plastic screw on your power supply that you can turn to adjust the voltage. The power supply is the small rectangle at the bottom of the case with a screw terminal strip labeled +5 +12 GND, etc.. etc.. DO NOT adjust it without a multimeter. You can take the +5 volts over 7 volts with that and damage your board. And remember relax, it's just a arcade game, not rocket science. Later, dabone |
| igotblueballz:
lol i dont got a voltage tester can you link me to a pic of what one looks like and ill pick one up tomorrow .. and i cant remove the board ive never opened one beofre this im not sure what im doing.... sorry but real newbie here tryin to learn please teach.... if your patience.. |
| Goz:
Where are you located? Perhaps if a member is local to you, they may be willing to help. -Goz |
| igotblueballz:
WOW THAT WOULD BE GREAT... i live in the new haven area in connecticut and im willin to pay !!! |
| igotblueballz:
anyone willing to help over the phone ?? |
| Navigation |
| Message Index |
| Next page |
| Previous page |