| Main > Main Forum |
| Tekken 2 kick harness |
| (1/2) > >> |
| Raven..:
Has anyone tried building their own Tekken kick harness? Sure I can buy one, but this IS BYOAC after all.... It looks like an old 5 1/4 floppy drive edge connector on a ribbon cable should work (with a slight mod). |
| Grauwulf:
The kick harness for Tekken 2 is a 48 pin connector(according to my manual). The one for a floppy is only going to be 34 I believe. |
| dabone:
I saw a page somewhere when someone just rerouted to kick harness wires over to unused pins on the jamma connector. Just a few jumper wires and done. Later, dabone |
| Raven..:
--- Quote from: Grauwulf on December 21, 2004, 06:06:49 am ---The kick harness for Tekken 2 is a 48 pin connector(according to my manual). The one for a floppy is only going to be 34 I believe. --- End quote --- Right. I cut two of them to make the full length. I haven't wired it up to the buttons yet though.....to cold in the garage to mess with right now! |
| wboy:
you can find them brand new on ebay for around $15US or so from time to time. |
| Navigation |
| Message Index |
| Next page |