| Main > Main Forum |
| Dumb Question- Turning on TBs/Spinners |
| << < (2/4) > >> |
| Tiger-Heli:
Been a while since I've used it, but in Analog +, you should have a "Mouse" or "Mouse Settings" or sth selection from the TAB menu on games that can use a trackball |
| eyal8r:
Well, I go into the Tab Menu, configure input (genereal), and then there's a HUGE long list of all the control options. I scroll to Trackball X, then you hit enter and are supposed to type in what you want it to be. If it were a button I was configuring, I would type in the key on the keyboard that I want the button mapped to. But with a spinner or TB, what do I type in? There's actually 2 lines for each device, so it shows Trackball X, Trackball X, Trackball 2, Trackball 2, etc. Same thing with the spinners. I just don't know what to type in here. Would someone mind guiding me to get this turned on? Thanks D |
| Tiger-Heli:
--- Quote from: eyal8r on December 15, 2004, 12:28:27 pm ---Well, I go into the Tab Menu, configure input (genereal), --- End quote --- Wrong menu - although it might not work for me now b/c of Win2k. Try the following: Open Command prompt - navigate to MAME directory - Run MAME (or MAME32 or MAMEAnalog32) with the -cc tag. You will find a file in the emulator directory called <emulatorname>.ini. Edit it to change the following lines: ### Input device options ### mouse 1 ### Analog+ options ### multiplemice 1 switchablemice 1 switchmiceaxes 1 splitmouseaxes 1 Restart MAME play a dual trackball game. On the main TAB menu, you should see a mouse options setting. . . |
| eyal8r:
Sweet! I'll check into this and post back. THANK YOU TIGER!!! D |
| eyal8r:
ok- did that. NOW- in the Tab menu- it gives options for Tackball X, Tackball X, Tackball Y, Tackball Y AND- Tackball X 2, Tackball X 2, Tackball Y 2, Tackball Y 2. On the player 1 set- it has set: Trackball X - left arrow OR J1 X Axis + Trackball X - right arrow OR J1 X Axis - Trackball Y - left arrow OR J1 X Axis + Trackball Y - left arrow OR J1 X Axis + So- this seems to be working. When it comes to the Player 2 settings, it just has Trackball X 2 - D Trackball X 2 - G Trackball Y 2 - R Trackball Y 2 - F So there's nothing telling it to use the trackball settings- I assume is the J2 X Axis +, J2 X Axis -, J2 Y Axis +, J2 Y Axis -. How do I type that stuff in there? It wont let me type it in, nor can I hit enter to modify it, and spin the trackball to get it to recognize it. If I leave these settings as is- BOTH trackballs control 1 player, while nothing moves on the other player (I'm testing with Marble Madness- so only 1 marble moves, the other sits there- both TBs move the 1 player). So, it seems to me that if I can get it to recognize the other TB movement, and configure it to recognize it, I'm all set. Any ideas on how to do this? Thanks soo much bud! D |
| Navigation |
| Message Index |
| Next page |
| Previous page |