Main > Main Forum
Bartop Plans
(1/4) > >>
DarkSol:
Does anyone know where I could find plans for a bartop machine?  I've been scouring the net for quite a while and all i see are upright, mini-upright, and cocktail plans.  This is actually going to be a JAMMA cabinet.  Anyone have any ideas?
Oddfeld:
http://www.skum.org/bartop has plans for his Happy Hour cab

Also, check out this thread for some other examples:
http://forum.arcadecontrols.com/index.php/topic,27939.0.html

These guys don't sell plans, but do sell the empty boxes they use for their bartops ($200 for an empty MDF box though...):
http://www.extraordinaryarcade.com/arcademachines.html
Stingray:
If I were going to build one I'd buy an appropriatly sized monitor and just design the thing around it.

-S
missioncontrol:
This thread contains several threads with pics of various bartops that may halp you out....

http://forum.arcadecontrols.com/index.php/topic,27281.0.html

and

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=23215

SteveJ34:
I've got plans drawn up for a scaled down galaga/mspac style cab which I scaled from full size drawings from jakobud.com which are designed to house a 10" SVGA monitor.

These bartops which are approx 22" tall, 18" deep and 13" wide....cutoff just below control panel to look like a mini galaga cab.

These are just ink on paper at the moment, actually, ink and pencil on foam artboard that I am using as stencil to cut side pieces and note placement of top/back/bottom and control panel supports.

I was planning to create more detailed set of plans with pics once I get through my projects.

Navigation
Message Index
Next page

Go to full version