| Main > Main Forum |
| Spinner Problem |
| << < (3/5) > >> |
| anoon:
I thought that MAME Analog+ didn't work with XP? (or is Analog+ not required as you are just splitting the mouse axis'?) Has anyone tried to get Off the Wall (2 player tennis game,) working with 2 spinners? |
| u_rebelscum:
--- Quote from: eyal8r on December 13, 2004, 07:54:25 pm ---Can you tell me about this sensor spacing thing? How do I know if/when it's spaced correctly? Thanks --- End quote --- The way the sensor work is they are alternately covered and uncovered by the teeth. So, if 1 meant covered and 0 uncovered, the two sensors are supposed to go 00 .. 10 .. 11 .. 01 .. 00 (repeat) if turned in one direction, and the opposite if turned in the other direction. The circuits can tell which direction it is turning by comparing what it changed from to what it changed to. However, if the spacings are ill matched, it could go 10 .. 01 .. 10 .. 01 (repeat), or 00 .. 11 .. 00 .. 11 (repeat). Or if one of the wires is bad, or it a sensor is broken, you get something like this: 00 .. 00 .. 01 .. 01 .. 00 (repeat) (red zeros noting it should be 1, but the sensor or wire is bad.) This is the most likely "wiggle back a forth one pixel" cause IMO. More mouse info. --- Quote from: anoon on December 13, 2004, 11:56:34 pm ---I thought that MAME Analog+ didn't work with XP? (or is Analog+ not required as you are just splitting the mouse axis'?) --- End quote --- Umm, current official mame can remap mice axes, but difficultly. Most recent analog+ (0.87 zero) doesn't add any multiple mice (that's why I called it a zero). The prior analog+ version, however, does do multiple mice in XP. I need to get analog+ up to date, but "Real Life" has been in the way. |
| Rocky:
jittering mouse = hooked up wrong / sensors not working good luck, Rocky |
| eyal8r:
Hmmm- so when you guys talk about switing it over to the Y1/Y2 axis- wouldn't the effect the way they are played in the games? Won't it tell the game to move the character up/down instead of left right? So in a driving game, it won't steer since it's moving up/down instead. Is that the case? I've checked all the wiring on the thing. It's hooked up and nothing disconnected. I hope the Oscar guys can post a little for me and clear this up. If the sensor is bad- will they replace it, since this is brand new... Thanks guys! D |
| Oddfeld:
--- Quote from: eyal8r on December 15, 2004, 11:17:42 am ---Hmmm- so when you guys talk about switing it over to the Y1/Y2 axis- wouldn't the effect the way they are played in the games? --- End quote --- |
| Navigation |
| Message Index |
| Next page |
| Previous page |