| Main > Main Forum |
| For the people that use t nuts |
| (1/3) > >> |
| vader:
I would like to use these for mounting my joysticks and wanted to know if I should countersink the hole with something like a forstner bit or just using a standard countersink and how the tnuts mount ? Do they just tap into place ? and last but not least...are these available at a home depot or lowes ? Tia Tim |
| Hoagie_one:
you can get them at both home depot and lowes |
| NoOne=NBA=:
They have 4 "spikes" that stick down toward the bolt head, and pound into place. This keeps the T-nuts from turning while you tighten the bolts, and the bolts suck the T-nut even tighter. |
| Troz:
I used a forstner bit to route the space for the t-nuts. Don't do what I did though and fill over the t-nuts without screws in them :( |
| vader:
Thanks guys....just got back from the depot and picked up a 6 pierce forstner set and was thinking to leave a screw in them when filling over, man, the things I think about before I go to sleep, used to be women....now its how can I mount this and that.... :P Tim |
| Navigation |
| Message Index |
| Next page |