| Main > Main Forum |
| Quick Release CP |
| << < (2/4) > >> |
| Stingray:
I started to use a SCSI cable, but determined that I wouldn't need nearly that many inputs, so I used a printer cable instead. -S |
| Minwah:
I use 12-way molex connectors - 1 for each player. I only have a max. of 2 players tho. Still, they can be disconnected/connected very quickly. |
| jck_strw:
Thanks for the tips. If I don't go with with a SCSI/printer cable, I was thinking of going the molex-connector-for-each-player-route. |
| GGKoul:
--- Quote from: Stingray on December 09, 2004, 08:51:50 am ---I started to use a SCSI cable, but determined that I wouldn't need nearly that many inputs, so I used a printer cable instead. -S --- End quote --- I used a printer cable, but the wires were too thin and were very difficult to wire up. Then I tried Ethernet cables, and I ran into an issue with each wire being wired differently.... so I'm in the process of used molex connectors. |
| SirPoonga:
My cabinet is designed like this. For wires I just run the wires from the joysticks and buttons to a db25 connector (then to the ipac). |
| Navigation |
| Message Index |
| Next page |
| Previous page |