Author Topic: Calling all Aussies . . . (Read 25250 times)

LordDamo · « **on:** December 07, 2004, 09:09:35 am »

Gday, I am just wondering what the Australian level of attendance of this board is. Im thinking of hosting a yahoo group for Aussie mame'ers, so we can trade cab info, dementions, suppliers, part vendors, reliving the "day" moments, etc.

Let me know what ya reckon . . . . . . .

RetroBorg · « **Reply #1 on:** December 08, 2004, 12:19:17 am »

I started this Aussie State Poll are while back:

http://forum.arcadecontrols.com/index.php/topic,9014.0.html

This should give you an idea of how many Aussies there are on here, your yahoo group sounds like a good idea.

danny_galaga · « **Reply #2 on:** December 08, 2004, 09:06:45 am »

deja vu

spriggy · « **Reply #3 on:** March 13, 2005, 09:15:21 am »

Better late than never... Another Aussie poking his head outta the sand.

Been floating around for a while. Was a guest for ages before I registered.

Time management and a regular mental hermit is my excuse.

Usually on the Main or Artwork forum.

NiN^_^NiN · « **Reply #4 on:** March 15, 2005, 05:13:59 am »

I'm an aussie but i'm already on tomany forums that going on a yahoo group is just not in my time frame i hardly visit here as is (i only just came back after almost 2 years leave)

A site for aussies on best places to buy parts cabs etc would be a great idea

a list of parts we can buy in australia would be very handy and links to sites were cabs pop up like tradingpost etc

Just an idea as there are already somany groups it should be something different

spriggy · « **Reply #5 on:** March 15, 2005, 11:12:17 am »

I feel like a traitor some times.

NiN^_^NiN · « **Reply #6 on:** March 16, 2005, 06:25:18 am »

The place i get my arcade stuff has a warehouse FULL of great arcade games

he has a Fully working Asteriods mmm love the vector monitor

But his warehouse is full of dedicated cabinets from an orignal japanese space invaders to a final lap 2 and super sprint 3 player

I love going there just to see all the machines mmmmm i wanna go there again

But it's rude to drool and not buy anything

spriggy · « **Reply #7 on:** March 16, 2005, 09:47:32 pm »

Hearing of rare places like this in OZ, where classics still exist, is great.

Curious, what's the asking price for some of his games. I haven't seen an original old dedicated machine sell for ages (in OZ).

NiN^_^NiN · « **Reply #8 on:** March 17, 2005, 08:48:55 pm »

Believe it or not he is very resonable

he was gonna sell the japanese space invaders cocktail for $600 and it was in pretty good condition.

He has some dedicated cabs which are dead like final lap 2 which he would sell pretty cheaply.

He is in melbourne down in the eastern suburbs so if u want the address just ask

I might go down on saturday and take some pics of the place if he doesn't mind now i just need an excuse to go there..... hmmm

spriggy · « **Reply #9 on:** March 18, 2005, 08:09:44 am »

Photo's would be interesting. Curious what he has..

NiN^_^NiN · « **Reply #10 on:** March 19, 2005, 03:25:47 am »

Sorry i didnt get to go there as I was busy with my car.

I'll try again next week but if u guys wanna go check it out ask me i'll tell u the address

its between bayswater and wantirna

richms · « **Reply #11 on:** March 19, 2005, 05:49:53 am »

Im interested, as shipping from aus to nz is much more reasonable then the states to nz.

spriggy · « **Reply #12 on:** March 19, 2005, 05:05:58 pm »

Quote from: NiN^_^NiN on March 19, 2005, 03:25:47 am

Sorry i didnt get to go there as I was busy with my car.

I'll try again next week but if u guys wanna go check it out ask me i'll tell u the address

its between bayswater and wantirna

From Perth. Not happening! $:-\$

atlantism · « **Reply #13 on:** May 02, 2005, 11:43:42 pm »

I'm from melb, hey NiN what's the address pm it to me if you like

Freeplay · « **Reply #14 on:** May 04, 2005, 05:56:14 pm »

Bump

Howdy All

Long time lurker..... Located in Sydney
I too have the sickness...... and hoping not to find a cure.

cyberfez · « **Reply #15 on:** May 05, 2005, 12:32:22 am »

Another Aussie here (Expat victorian) living in Adelaide. I own a Galaxian/Moon Cresta Cocktail Cabinet and I just built an upright MAME cab.

Link

rockmes · « **Reply #16 on:** May 05, 2005, 02:36:40 am »

Hi guys , ive also been around for years but never been into posting much until l built my own mame machine. l live in Melbourne
Here's my homepage with my arcade machine and a few photos:

http://members.optusnet.com.au/rockmes1/gallery.html

listen where could l find a good spinner for my machine here in Australia??
l dont want to buy from offshore.

NiN^_^NiN · « **Reply #17 on:** May 05, 2005, 06:39:09 am »

Quote from: atlantism on May 02, 2005, 11:43:42 pm

I'm from melb, hey NiN what's the address pm it to me if you like

Sorry i didn't see your post

Factory 1/15 Michellan Crt Bayswater VIC 3153
ph: (03) 9720 6422

great place just wish i had an excuse to go there

HoopstarsGarage · « **Reply #18 on:** May 05, 2005, 08:44:23 pm »

Another Adelaide boy..

I am part way through the build up of my own cab which features nice things like auto monitor rotation and one of the funkiest sound systems I think the MAME world has ever seen..

Will post more details soon both on BYOAC and OCAU.

D5A1AC · « **Reply #19 on:** May 07, 2005, 08:38:47 am »

Im an Aussie too. Im from Perth to be specific. Does anyone know any suppliers cheaper / generally "better" than Ozstick in Australia? I'd just like to know if Ozstick is running the show in Australia or if there are any other options. there is www.arcadegames.net in Perth but they never emailed me when I asked (twice) for mounting dimensions so they wont get my money.

Btw, this is my unfinished mame cocktail cabinet: www.mikesarcade.tk What do you think? Got any tips or suggestions?

spriggy · « **Reply #20 on:** May 07, 2005, 09:27:02 am »

Quote from: D5A1AC on May 07, 2005, 08:38:47 am

Im an Aussie too. Im from Perth to be specific. Does anyone know any suppliers cheaper / generally "better" than Ozstick in Australia? I'd just like to know if Ozstick is running the show in Australia or if there are any other options. there is www.arcadegames.net in Perth but they never emailed me when I asked (twice) for mounting dimensions so they wont get my money.

Btw, this is my unfinished mame cocktail cabinet: www.mikesarcade.tk What do you think? Got any tips or suggestions?

Welcome.

D5A1AC · « **Reply #21 on:** May 08, 2005, 06:28:25 am »

Wow the AUD is quite strong at the moment

Thanks for the tip, I just assumed it'd be cheaper to buy from Australia but now I'll be cutting down on the cost by about a third! Too bad they dont have the rectangular buttons with the light in them. I had planned to use them as a "credit" buttons. Do they absolutely not stock them over there or do they sell them if you enquire?

The buttons I'm talking about are these: http://ozstick.com.au/pb06.jpg aka "PB06"

spriggy · « **Reply #22 on:** May 08, 2005, 08:42:06 am »

Quote from: D5A1AC on May 08, 2005, 06:28:25 am

...Too bad they dont have the rectangular buttons with the light in them. I had planned to use them as a "credit" buttons. Do they absolutely not stock them over there or do they sell them if you enquire?

The buttons I'm talking about are these: http://ozstick.com.au/pb06.jpg aka "PB06"

Wico and Happs definately stock them.

D5A1AC · « **Reply #23 on:** May 09, 2005, 06:12:45 am »

I assume you mean that you can use the shift function to assign, say, the p1 button to the p1 credit button as well? If so I knew that, I just thought it would be cooler having a lit button for each player to insert credits

Alright, thanks I'll get the square buttons off of Oz stick

spriggy · « **Reply #24 on:** May 09, 2005, 06:53:20 am »

Quote from: D5A1AC on May 09, 2005, 06:12:45 am

I assume you mean that you can use the shift function to assign, say, the p1 button to the p1 credit button as well?

Yup.

damono · « **Reply #25 on:** May 10, 2005, 06:29:35 am »

hey hey .. im in perth too.. Have a 52" rear pro Mame cab and in process of building an MP3 jukebox.

I found arcadegames.net were very hard and expensive to deal with, ozstick are easy to deal with and fairly cheap (considering), but havent got all the nice little bits like hard to get hold of buttons, so i had to order a keypad and few buttons from the US (Happ). Shipping was a killer.. the order i think was $40US and shipping was another $35US on top. Which makes it an expensive hobby to source ---steaming pile of meadow muffin--- from over seas

spriggy · « **Reply #26 on:** May 10, 2005, 07:38:57 am »

Quote from: damono on May 10, 2005, 06:29:35 am

hey hey .. im in perth too.. Have a 52" rear pro Mame cab and in process of building an MP3 jukebox.

I found arcadegames.net were very hard and expensive to deal with, ozstick are easy to deal with and fairly cheap (considering), but havent got all the nice little bits like hard to get hold of buttons, so i had to order a keypad and few buttons from the US (Happ). Shipping was a killer.. the order i think was $40US and shipping was another $35US on top. Which makes it an expensive hobby to source <auto-censored> from over seas

That shipping seems steep for the items you purchased.

NiN^_^NiN · « **Reply #27 on:** May 10, 2005, 08:13:32 am »

I just buy a Keywiz for $50 AUD in aus it's cheap and it's no different than ipacs etc i like the keywiz more i got 3

damono · « **Reply #28 on:** May 10, 2005, 09:08:05 am »

I just bought a Jpac + ArcadeVGA for my arcade machine.. nice and easy to hookup and for my jukebox ive just finished hacking a keyboard, going to interface it with a nice jukebox style keypad from Happ. Should be sweet when/if I finish it.

acejas · « **Reply #29 on:** May 10, 2005, 11:14:46 pm »

hey guys

calling from the sunny Gold Coast here. Id like to know if anyone knows if there is a supplier of Colored t - molding.

I buy my other stuff from ultimarc, rob roberts and oscar and no problems

I wasted $50 on teh spinner from ozsticks...was very dissapointed.

Id like to have some kind of email newsletter to aus/nz and would be happy to help out. This way its delivered to our inbox's and keeps us up to date etc

Any thoughts?

Cheers
acejas

spriggy · « **Reply #30 on:** May 10, 2005, 11:40:09 pm »

Quote from: acejas on May 10, 2005, 11:14:46 pm

hey guys

calling from the sunny Gold Coast here. Id like to know if anyone knows if there is a supplier of Colored t - molding.

I buy my other stuff from ultimarc, rob roberts and oscar and no problems

I wasted $50 on teh spinner from ozsticks...was very dissapointed.

Id like to have some kind of email newsletter to aus/nz and would be happy to help out. This way its delivered to our inbox's and keeps us up to date etc

Any thoughts?

Cheers
acejas

In relation to the T-molding, what colors are U after? I have 2 suppliers here in Perth. I have only used one of them at this stage and have only needed to order black & white.

As for the newsletter, I don't think there's enough going on in Aus to warrant one... not for Perth anyway. Don't get me wrong, I like the idea, but it would probably be easier to start a thread here in the forum under 'Arcade Miscellaneous' and post the info in it....& will obviously notify you of any updates. What kind of info would you want in the newsletter?

dakka68 · « **Reply #31 on:** May 11, 2005, 12:07:55 am »

Hi, newb to the list here from GoldCoast (not so sunny today).
Used this great site a year or so ago when I built my cocktail machine, have had that many coments from people that have seen it that I am building 4 more, see if they put their money where there mouth's are!!

Cheers
Dakka

danny_galaga · « **Reply #32 on:** May 11, 2005, 03:29:39 am »

Quote from: dakka68 on May 11, 2005, 12:07:55 am

Hi, newb to the list here from GoldCoast (not so sunny today).
Used this great site a year or so ago when I built my cocktail machine, have had that many coments from people that have seen it that I am building 4 more, see if they put their money where there mouth's are!!

Cheers
Dakka

hey have you got a site for your cocktail? and is it a 'school desk' type? ive been building up a list of these types of cocktail on my site so that it can act as a bit of a resource...

dakka68 · « **Reply #33 on:** May 11, 2005, 07:13:13 am »

Um, Yes I think.
This is the only type I ever saw in Oz growing up, did not know of all the variations until I did a bit of research here.
Just a couple of photos. Have more but need to sit down and build a proper site around it.
http://home.austarnet.com.au/kemptest/arcade/P6020011sm.jpg
http://home.austarnet.com.au/kemptest/arcade/P6020016sm.jpg

Have a bit more artwork on it, just cutouts under the glass, going to jump over to the Artwork forum and see how the fancier stuff is done.
Construction is fine except for the monitor fitting, will improve this on the next ones, my one is'nt so bad as I know its not getting moved around
Inspiration was from the cabinet on this site
http://www.cia.com.au/ihs/cocktail/cabinet.html

dakka68 · « **Reply #34 on:** May 11, 2005, 07:33:53 am »

Danny_Galaga, just checked out your site and have had some serious De-javu.
Based on the same cabinet! (except for the rotating part). And I am going to buy a Torana to start another project with any money I can squeeze out of the 4 Cabinets (LH not LJ).
Thinking of doing some airbrush type stuff on the lower sides of mine to liven up the black on black on black theme.

Cheers
Dakka

acejas · « **Reply #35 on:** May 11, 2005, 07:59:54 am »

Spriggy

Im after yellow and orange tmoulding...let me know if they supply stuff

Was just passing some ideas around....maybe a sub forum of AUS/NZ. Just be nice to swap knowledge and other stuff. For example ive just found out after 2 years on here ....somone in Oz knows of tmolding

hey even this threa could do it

Cheers

spriggy · « **Reply #36 on:** May 11, 2005, 09:18:13 am »

Quote from: acejas on May 11, 2005, 07:59:54 am

Spriggy

Im after yellow and orange tmoulding...let me know if they supply stuff

Was just passing some ideas around....maybe a sub forum of AUS/NZ. Just be nice to swap knowledge and other stuff. For example ive just found out after 2 years on here ....somone in Oz knows of tmolding

hey even this threa could do it

Cheers

How about this.... IMO a thread relating to Australian localised information would be handy. For eg, Australian based part/machine suppliers & locations, auctions, trade & free stuff etc etc.

IMO a thread in the 'Arcade Misc.' sub-forum, headed 'Local OZ Arcade Info' would be plenty. I'll could PM one of the admins, for a long shot, and see if they could sticky the thread!?

So? What do you think?

acejas · « **Reply #37 on:** May 11, 2005, 07:52:34 pm »

sounds great

also what about the t-moulding?

danny_galaga · « **Reply #38 on:** May 11, 2005, 08:02:48 pm »

Quote from: dakka68 on May 11, 2005, 07:13:13 am

Um, Yes I think.
This is the only type I ever saw in Oz growing up, did not know of all the variations until I did a bit of research here.
Just a couple of photos. Have more but need to sit down and build a proper site around it.
http://home.austarnet.com.au/kemptest/arcade/P6020011sm.jpg
http://home.austarnet.com.au/kemptest/arcade/P6020016sm.jpg

Have a bit more artwork on it, just cutouts under the glass, going to jump over to the Artwork forum and see how the fancier stuff is done.
Construction is fine except for the monitor fitting, will improve this on the next ones, my one is'nt so bad as I know its not getting moved around
Inspiration was from the cabinet on this site
http://www.cia.com.au/ihs/cocktail/cabinet.html

yes, cia was one of the ones that got me started too, him and this one which has the most important measurements and diagrams:

http://underworld.fortunecity.com/fifa/294/

excellent work on your cab too. when you have a bit of a site going PM me so i can add it to my list. i've nine 'school desk' cab links so far (",)
so is your LH a six or eight?

spriggy · « **Reply #39 on:** May 12, 2005, 05:02:08 am »

Quote from: acejas on May 11, 2005, 07:52:34 pm

sounds great

also what about the t-moulding?

Sorry. The suppliers I use don't stock these colors. One place states however that he can get this stuff in...however you can only buy it by the 150m roll @$90.00...which is a damn good price! He stated his supplier is in the eastern states.

Regardless, I contacted the 3 places I know in Perth..and they all stock the same colors. ie black, white, greys, bieges etc.

Sorry mate.

spriggy · « **Reply #40 on:** May 12, 2005, 08:19:16 am »

..in relation to this 'Oz Arcade Info' sticky thread I was throwing around...
I honestly think we just keep utilising this thread instead for that type of info. Just easier. Keep things simple.

acejas · « **Reply #41 on:** May 12, 2005, 08:20:03 am »

Thanks for all that mate

Yep it is a cheap price for rolss. Sorry to be a pain but would you be able to find out the supplier in teh eastern states? I may be able to get a smaller amount

cheers

acejas · « **Reply #42 on:** May 12, 2005, 08:22:36 am »

I disagree

I mean i only came over to this forum by chance...and really we have gone off topic about new projects...im going to ask for a sub forum and see if we get the go ahead or at least start a topic in general...yeah start one in general

Cheers

spriggy · « **Reply #43 on:** May 12, 2005, 08:31:31 am »

Quote from: acejas on May 12, 2005, 08:22:36 am

I disagree

I mean i only came over to this forum by chance...and really we have gone off topic about new projects...im going to ask for a sub forum and see if we get the go ahead or at least start a topic in general...yeah start one in general

Cheers

PM Peale about it. He has OK'd a sticky thread..... So go for it. A sub-forum may be overboard.

As for the supplier, I'll find out.

spriggy

Virgil Tracy · « **Reply #44 on:** May 14, 2005, 06:47:18 pm »

For all the aussie on the lists a new Australian based forum has started at http://218.214.97.249/cgi-bin/yabb2/YaBB.pl. I have posted a link for BYOAC as well as many of us have relied upon this site to get us started.

HoopstarsGarage · « **Reply #45 on:** June 03, 2005, 12:40:09 am »

Spriggy (or anyone else)

Can you give me the number of the place you buy your T-molding from in Perth?

Also can someone advise what size slot cutter is needed for the T molding - OzStick say 2.4mm - 3.0mm and no more than 15mm deep but every place I ring say the slot cutter is approx 50mm in diameter, therefore you'd get around a 25mm deep slot..??

And as for cars... I have a HR that I've done up a little bit - check it out HERE...

Hoops

OzStick · « **Reply #46 on:** June 03, 2005, 12:45:28 am »

Quote from: Virgil Tracy on May 14, 2005, 06:47:18 pm

For all the aussie on the lists a new Australian based forum has started at http://218.214.97.249/cgi-bin/yabb2/YaBB.pl. I have posted a link for BYOAC as well as many of us have relied upon this site to get us started.

Good to hear - I will now start hanging out at a "local" forum and make myself better known!!!

spriggy · « **Reply #47 on:** June 03, 2005, 01:05:47 am »

Quote from: HoopstarsGarage on June 03, 2005, 12:40:09 am

Spriggy (or anyone else)

Can you give me the number of the place you buy your T-molding from in Perth?

Also can someone advise what size slot cutter is needed for the T molding - OzStick say 2.4mm -

OzStick · « **Reply #48 on:** June 03, 2005, 03:08:30 am »

Quote from: HoopstarsGarage on June 03, 2005, 12:40:09 am

Spriggy (or anyone else)

Can you give me the number of the place you buy your T-molding from in Perth?

Also can someone advise what size slot cutter is needed for the T molding - OzStick say 2.4mm -

HoopstarsGarage · « **Reply #49 on:** June 03, 2005, 03:58:11 am »

I was over at my cabinet builder mates house this afternoon and asked him - he rang up his supplier (can't remmeber the name atm) and order some black 20mm T-molding for $2.00 per metre plus GST ($2.20). So it isn't that much cheaper than somewhere like Ozsticks.com - He is also hooking me up with a slot cutter to borrow so at least I don't have to buy one.

Priced a slot cutter at Flintware tool supplies here in Adelaide and was $52 each..!!

The 20mm T-molding is way bigger than I need (16mm MDF) but he said it was common practice to cut it down..

There is also a Galvins here in Adelaide..

danny_galaga · « **Reply #50 on:** June 03, 2005, 10:15:04 pm »

Quote from: HoopstarsGarage on June 03, 2005, 03:58:11 am

I was over at my cabinet builders house this afternoon and asked him - he rang up his supplier (can't remmeber the name atm) and order some black 20mm T-molding for $2.00 per metre plus GST ($2.20).

Virgil Tracy · « **Reply #51 on:** June 04, 2005, 12:09:59 am »

Updated address for Aussie Forum

http://www.aussiearcade.com.au/

Bones · « **Reply #52 on:** August 11, 2005, 07:46:11 pm »

PM me if interested.

http://forum.arcadecontrols.com/index.php?topic=41387.0

Greaper · « **Reply #53 on:** August 16, 2005, 08:27:19 pm »

Sunny Coast, Qld...

DannyH · « **Reply #54 on:** August 17, 2005, 02:43:38 am »

Lower North Shore of Sydney here.

P.S if you need help throwing a website together I will be ahppy to get you started as its my trade.

Some examples of my work: http://www.Silvertails.net & http://www.Sportsnews.com.au

bennyfactor · « **Reply #55 on:** August 23, 2005, 12:30:13 am »

anyone know where i can pick up an empty cab in perth wa?

elvis · « **Reply #56 on:** August 23, 2005, 07:36:01 pm »

Quote from: bennyfactor on August 23, 2005, 12:30:13 am

anyone know where i can pick up an empty cab in perth wa?

Filtek is in WA. Dunno what their pricing is like:

http://www.arcadegames.net/

[edit] Check their "Junkyard" link. There's a few empty shells in there. [/edit]

D5A1AC · « **Reply #57 on:** August 24, 2005, 06:18:31 am »

Another guy from Perth! I think that makes the two of us and maybe one other guy

. I had visited filtek once, and it seemed like an allright kinda place. The "junkyard" has a heap of arcades - I even saw a two car seater sit down cab. Keep in mind though that I do not think they were protected very well. If my memory serves me correct, they were stored under a carport. If you are thinking of buying buttons from there too just take a look at them before you buy. I almost bought some but the "skirts" around the button were slightly different for different coloured buttons as well as the depth of the dimple.

Good luck!

bennyfactor · « **Reply #58 on:** August 24, 2005, 08:25:30 am »

Thanks, I'll check out Filtek with a critical eye.

Nice to hear from another Perth member D5A1AC
i checked out your page and i really like what you've done so far

I actually managed to snap up an empty lai lowboy from ebay a few months ago, only $20 and it was only down the road in malaga.

i've told a mate of mine all about my project and now he want's one too, which is why i'm after another shell.

i've attached a pic of my (very much) work in progress setup (pretty unimpressive i know) - basically i wanted it playable asap, and i'm slowly moving it towards it's true potential

D5A1AC · « **Reply #59 on:** August 24, 2005, 08:33:51 am »

Nice cab! I was thinking of going for a black-red-black 3X2 button layout (the same as yours bar the 7th button and I'll use ball-top Jsticks) And after seeing your cab I'm sure that I will now

It's interesting that you decided to get it working before finishing it - I've gone for the exact opposite approach. I have the PC set up and whatnot but the arcade buttons/joysticks are going to be the last thing I buy because If I were able to play it I'd never get time to finish it!

vornar · « **Reply #60 on:** August 24, 2005, 09:05:52 am »

Hi fellas

Just stumbled accross this post. (I never check the project announcements). I usually hang out on the main and artwork forum.

Anyway, i'm from Melbourne, (mornington Penninsula to be excact) and have been bitten by the bug...

I plan to build a lucid cab (havent started yet). with a 27" T.V.

bennyfactor · « **Reply #61 on:** August 24, 2005, 07:19:31 pm »

lol
well i've got a 15 month old daughter and no shed, so i needed all the bits contained where she couldn't get to them, and i can only grab limited amounts of time here and there to do 1 small job at a time, so i figured i'd put together everything i had and slowly refine it. (also i'm really impatient, lol)

it's slow but steady progress

damono · « **Reply #62 on:** August 26, 2005, 08:36:10 pm »

Hey guys.. im from perth too. Ive got a 'few' machines, too many if you ask my girlfriend

damono · « **Reply #63 on:** August 26, 2005, 08:44:48 pm »

Also im in the process of making a jukebox with touchscreen, remote and wireless av sending to a tv (also wireless network back to my pc). Coming along very nicely atm, but just finding the time to get it all together is the trouble. I'll post a pic of that too

Its all wired up now with fans and power and reset illuminated buttons on the back and the most important thing, 2 drink holders as you can see in the photo

D5A1AC · « **Reply #64 on:** August 26, 2005, 09:31:27 pm »

Wow, your rear projection mame machine is awesome! I would love to have something like that. Are the tubes there to hide the wires or to make it seem more like one structure? It might be a little more portable without those.

damono · « **Reply #65 on:** August 26, 2005, 09:36:03 pm »

Cheers buddy. Playing bubble bobble on a 52" screen is quite the experience i tell you

The three tubes (only one connected in photo) just are used to run the wires to and from the CP (power and monitor signal).

bennyfactor · « **Reply #66 on:** August 29, 2005, 11:11:52 pm »

Well i called Filtek and they don't keep empties anymore. Any other ideas? Otherwise i'll be building from scratch

spriggy · « **Reply #67 on:** August 30, 2005, 12:24:45 am »

Haven't been on the forum for a while...again. Screw this illness stuff!!! Hopefully will be back into the arcade madness soon... health is a priority at the moment.

Just quickly though. For the Perth lads asking questions, your best bet for cabs is the Quokka unfortunately. Filtek's workshop has been closed for little while and their junkyard hasn't really been around for about 3 years. The Quokka usually only has full working machines however. Most of these aren't worth more than $300..so their usually overpriced. WA based ebay auctions would be your next bet. I have only 1 gutted LAI lowboy left and my mate has dibs on it (I'm doing a mame conversion for him).

Following that (as I do), build them from scratch. Plenty of plans on Jakobuds site and other areas. A search of the BYOAC forum will reveal all you need.

If you need parts and your located in Perth, just ask me. I've priced and bought from within Perth, Aus and overseas, comparing quality and price. Until prices come down here in Aus, overseas is your best bet for 70% of the main parts..for quality and price.

Good luck.
spriggy

Bones · « **Reply #68 on:** August 30, 2005, 12:26:56 am »

Quote from: bennyfactor on August 29, 2005, 11:11:52 pm

Well i called Filtek and they don't keep empties anymore. Any other ideas? Otherwise i'll be building from scratch

Scratch build. More fun.

damono · « **Reply #69 on:** August 30, 2005, 05:44:27 am »

yeh what spriggy said.

Next week im placing an order for some illuminated pushbuttons that looks bloody awesome. The website is www.fxbuttons.com and they are located in the US (he's on this forum too but cant remember his name)

If any1s keen on some in perth, they can tack their order on the end of mine and we can split the postage. They are very very nice

cdbrown · « **Reply #70 on:** September 05, 2005, 02:12:42 am »

Well I can't believe I never came across this thread before.

I'm from Perth as well. I knew there were Aussies floating around here and more were joining regularly but didn't know so many were from Perth. This is good stuff.

Cheers
-cdbrown

gsoul · « **Reply #71 on:** September 27, 2005, 02:02:14 am »

Okay, not advertising or nothing, but I'm in the process of building an Australia arcade related site. Hoping to have it finished in the next couple of weeks. The primary purpose is to build a common site for Aussie Arcade Enthusiasts, Collecter and Professionals.

Present implementation include
1) Trading Post
2) Auction
3) Forum
4) Dealer Directory

Anyone interested, let me know. I'm looking for people to help out with stuff including administration etc.

http://www.coinop.com.au

I'll post it when the site is completed.

gsoul · « **Reply #72 on:** September 27, 2005, 02:05:48 am »

I'm particularly interested in ideas regarding the Forums..

wrx2hot4u · « **Reply #73 on:** December 27, 2005, 08:15:22 am »

Hi Guys

Been a long time between drinks! Hope everyone had a good christmas and is going to have a safe New Year!

www.aussiearcade.com.au has been updated using VB and has some cool new features like "Trader Ratings" and "Online Game" etc etc

Have a couple of beers for me guys on New Year! Bring ON 2006!

danny_galaga · « **Reply #74 on:** January 01, 2006, 02:55:58 am »

happy new year guys! and if you haven't done it already, put your name up here:

http://www.frappr.com/byoacmembermap

it's filling out quite nicely (",)

spriggy · « **Reply #75 on:** January 01, 2006, 03:55:19 am »

Quote from: danny_galaga on January 01, 2006, 02:55:58 am

happy new year guys! and if you haven't done it already, put your name up here:

http://www.frappr.com/byoacmembermap

it's filling out quite nicely

wrx2hot4u · « **Reply #76 on:** July 02, 2006, 06:24:31 am »

Update: If anyone stills looks that this thread.

www.aussiearcade.com.au is now 415 members strong with 17,000 + posts.

Drop in and say hi

DeLuSioNal29 · « **Reply #77 on:** November 12, 2008, 03:32:45 pm »

Quote from: D5A1AC on May 07, 2005, 08:38:47 am

there is www.arcadegames.net in Perth but they never emailed me when I asked (twice) for mounting dimensions so they wont get my money.

The reason you got no response is because they are no longer in business. Read more here: http://www.arcadegames.net/aboutus.htm

~ D


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news