| Main > Main Forum |
| New Product: Versa-Ball Joystick Replacement Shafts |
| << < (17/20) > >> |
| whammoed:
--- Quote from: RandyT on February 18, 2005, 09:13:42 pm ---But I was curious as to the plastic spacer. --- End quote --- |
| quarterback:
--- Quote from: whammoed on February 18, 2005, 07:42:23 pm ---OK, heres the news on the versaball and Ms Pac base: --- End quote --- Is this the 1 3/8" dark red shiny Versa-Ball? Also, it looks like there a ridge around the 'equator' of this ball top. Is there? Can you feel it? Thanks |
| whammoed:
--- Quote from: quarterback on February 19, 2005, 02:29:40 am --- --- Quote from: whammoed on February 18, 2005, 07:42:23 pm ---OK, heres the news on the versaball and Ms Pac base: --- End quote --- Is this the 1 3/8" dark red shiny Versa-Ball? Also, it looks like there a ridge around the 'equator' of this ball top. --- End quote --- |
| spidermonkey:
I've made extra grooves by putting the joystick shaft into a drill chuck just as you would a bit. I then *carefully* clamp the drill down in a vise. I then engage the trigger lock so that the drill stays running. I then make a mark where I want my groove and take a fine tooth hacksaw just hold it down on my mark and let the drill do the work for me. Keep trying the e-clip several times during the process so that you don't cut any deeper then necessary. Lastly I take a fine piece of emery cloth and buff off the burrs while its still spinning in the drill. Thats it. |
| JODY:
Original Ms. Pacman / Galaga reunion stick. Old and new handle pic. |
| Navigation |
| Message Index |
| Next page |
| Previous page |