| Main > Main Forum |
| New Product: Versa-Ball Joystick Replacement Shafts |
| << < (10/20) > >> |
| RandyT:
--- Quote from: spiffyshoes on November 24, 2004, 06:55:52 pm ---Randy: The E-Clips on the Pac Man Revolution joysticks are 5cm apart and the shaft is 10mm thick. From the end of the shaft to the bottom of the ball is about 8 cm total. And the Diameter of the Ball is about 1-1/4" thick. --- End quote --- Excellent. Thank you for the info spiffyshoes! But just to clarify, are you referring to the Pac-Man Reunion / Galaga joystick? Thanks, RandyT |
| spiffyshoes:
Yeah, the Pac Man reunion was the one I was talking about. |
| RandyT:
--- Quote from: spiffyshoes on November 25, 2004, 12:43:47 am ---Yeah, the Pac Man reunion was the one I was talking about. --- End quote --- Great. Thanks. :) Based on this, I have high confidence that the Versa-Ball sticks will indeed work with the Pac Man Reunion/Galaga joysticks. Both sets of grooves appear to be at the right places, which means installation in either 1/2" or 3/4"+ thick panels should be possible and would extend the height by about 4 cm in either setting. I'll update the main post with this info. RandyT |
| pcates:
Randy do you have any that will fit a nintendo joystick? I have a stick for my Donkey Kong that was originally in a metal panel (too short). The stick is only 6mm thick. Can you help??? Patrick |
| RandyT:
--- Quote from: pcates on November 25, 2004, 01:28:37 am ---Randy do you have any that will fit a nintendo joystick? I have a stick for my Donkey Kong that was originally in a metal panel (too short). The stick is only 6mm thick. Can you help??? --- End quote --- Sorry Patrick, I'd like to help, but I don't think the demand would be very high for these. At best it would be a one-off situation and probably pretty costly to do. You might want to consider just replacing the whole stick. Could be a better solution in the long run. RandyT |
| Navigation |
| Message Index |
| Next page |
| Previous page |