Main > Main Forum
New Product: Versa-Ball Joystick Replacement Shafts
Minwah:
--- Quote from: NoOne=NBA= on November 22, 2004, 07:16:19 pm ---The shaft is alot longer on the bottom, so that he longer actuator can be used.
--- End quote ---
Not as simple as just turning another groove then :(
RandyT:
For those who have been waiting, the Versa-Ball shafts are now available at the GGG Store under the "Modifications" and "Joysticks" categories.
A direct link is here.
Also, the shafts are the standard 10mm diameter used on a number of sticks. If your stick requires a 10mm shaft, and you can supply me with the distance between the top shoulder and the bottom e-ring, I will give you an indicator as to whether these have a chance of working with your base. Because of the way the T-Stick is attached to the base, I do not believe these shafts will work with them.
The "Retro" has it's own special shaft as it is a top mounted stick. These shafts are designed for below panel installations.
We will continually explore new ball types and colors, but these are the options for now. Current diameters range from 1.25" to 1.5" and are listed as options at the store.
Unless I can find a source for bulk dust washers, I'll be forced to make my own. This is not an issue for anyone other than OMNI-Stick owners as you can use the one from your current base. More as this develops.
As for my "abrasive" nature.....probably has something to do with those pills they told me to take, back when I joined the military...(they never did tell me what they were for :) )
RandyT
Tiger-Heli:
--- Quote from: RandyT on November 23, 2004, 08:10:56 am ---For those who have been waiting, the Versa-Ball shafts are now available at the GGG Store under the "Modifications" category.
A direct link is here.
--- End quote ---
Thanks Randy! I recommend also listing them under Joysticks or Cross-linking them under Joysticks, as that is where I think most people would look for them. You probably want to update the main page about them.
RandyT:
--- Quote from: Tiger-Heli on November 23, 2004, 09:59:52 am ---Thanks Randy! I recommend also listing them under Joysticks or Cross-linking them under Joysticks, as that is where I think most people would look for them.
--- End quote ---
Done. Thanks for the feedback. The main page is going to take a little longer. To make the store easier for people to find, I am going to make a "Y" in the road as the first page of the GGG site. Should make it easier for folks to get to where they want to be. I'll also be trying to add more of the inventory of parts I've been sitting on to the store.
Thanks,
RandyT
SaiNRuB:
Looks really good Randy, nice job.
Say I was wondering is there any joystick shaft i can use to replace on my OMNI Prodigy non retro joystick. I was wanting a black balltop to go with my nintendo cab. I really like the black shiny 1 3/8" :)
Good luck on your new products!