Main > Main Forum
Problems With Control Buttons
<< < (2/3) > >>
kommando2004:
Thank you for all the replies. I just disconnect the two wires behind one of the good buttons and reconnected on to the one that wasn
ddockery:
To remap, while inside MAME, press the TAB key.  From there it should be pretty straightforward.
Tiger-Heli:

--- Quote from: Apollo on November 21, 2004, 12:08:04 am ---I thought MAME didn't support buttons 5 & 6. Don't you have to map these seperately?

--- End quote ---
Mame does not initially support buttons 5 and up for Player 2.  Player 1 should be working, and Player 2 should work after configuring in the TAB menu.
paigeoliver:
Fire up NOTEPAD and press those buttons and see if they are sending any keys.

They probably aren't mapped.

Or, your cabinet might have a JPAC in it, and the builder didn't bother to do the extra wiring for buttons 5 and six.
kommando2004:
I press tab and went into the Input General, and selected player1 button the 5 and 6 button pressed enter on my keyboard, then I started to press the buttons themselves on the control panel, there is no response registering on the screen. How do I get into notepad, I will need to hook up the computer to a PC monitor first, because the window 98 screen on my cabinet is spilt and warped. Thank you again all for your helpful responses.
Navigation
Message Index
Next page
Previous page

Go to full version