| Main > Main Forum |
| Testing control mapping to keyboard |
| (1/1) |
| WonderMellon:
I have 1 joystick and 1 set of buttons wired and hooked up to my keywiz. Unfortunatly I seem to have destroyed the disk that came with the encoder. I need to see what keys on the keyboard the controls are mapped to. Is there a program out there that will tell you what keys are pressed? I can use notepad for the alpha keys, but that won't show me the arrow and control keys. |
| Tiger-Heli:
--- Quote from: WonderMellon on November 04, 2004, 12:40:16 pm ---I have 1 joystick and 1 set of buttons wired and hooked up to my keywiz. Unfortunatly I seem to have destroyed the disk that came with the encoder. I need to see what keys on the keyboard the controls are mapped to. Is there a program out there that will tell you what keys are pressed? I can use notepad for the alpha keys, but that won't show me the arrow and control keys. --- End quote --- Well, the keywiz doesn't save custom settings in memory, so if you aren't loading the keywiz software at bootup, you can re-start you machine and the keys will be mapped to: http://www.mameworld.net/tigerheli/encoder/inputs.jpg If you are using the software, I think it will show you the keyassignments, or you can use Ghostkey, KeyJammin, KeyScan, etc. from http://www.arcadecontrols.com/arcade_downloads.shtml#Utilities |
| WonderMellon:
Thanks Tiger-Heli! I was looking in the interfaces section. I completely missed the utilities section. |
| Navigation |
| Message Index |