Main > Main Forum
wiring I-PAC2 for an esc button
shorething:
I have everything wired, except the esc key.
I have 6 buttons per player, so they are wired to the position 1-6 on my I =PAC 2.
I have 2 open spots on each side of the I-PAC 2 (positons 7 & 8)
Where should I wire my esc button?
Do I just do it to 7 or 8 and adjust it using the software?
Or is there a default on the I pac for esc (without shifting)?
What is the default shifting combination for esc?
Thanks!
Bgnome:
shifted player 2 start is the default for esc
shorething:
I hate to sound like a putz...
but what do I press along with player 2 to get the shifted
esc to work?
:)
Bgnome:
you must hold down player 1 start, which is the default shift key, to gain access to the shifted functions. and if you wanted to sound less like a putz, you could always try reading the manual ;)
IncrdblHulk7:
I beleive that Player1 doubles as the Shift key on the default IPAC settings