| Main > Main Forum |
| wiring I-PAC2 for an esc button |
| (1/2) > >> |
| shorething:
I have everything wired, except the esc key. I have 6 buttons per player, so they are wired to the position 1-6 on my I =PAC 2. I have 2 open spots on each side of the I-PAC 2 (positons 7 & 8) Where should I wire my esc button? Do I just do it to 7 or 8 and adjust it using the software? Or is there a default on the I pac for esc (without shifting)? What is the default shifting combination for esc? Thanks! |
| Bgnome:
shifted player 2 start is the default for esc |
| shorething:
I hate to sound like a putz... but what do I press along with player 2 to get the shifted esc to work? :) |
| Bgnome:
you must hold down player 1 start, which is the default shift key, to gain access to the shifted functions. and if you wanted to sound less like a putz, you could always try reading the manual ;) |
| IncrdblHulk7:
I beleive that Player1 doubles as the Shift key on the default IPAC settings |
| Navigation |
| Message Index |
| Next page |