Main > Main Forum

Help - Can't Remove Screws from Cab

Pages: << < (2/2)

missioncontrol:

take the screw you did manage to get out to the auto parts store...they may have that size with the hole in the center...I had to get something similar to those when changing my ignition in my car....worth a shot....

Tailgunner:

I picked up a 4 piece set of security torx screwdrivers at Lowes not too long ago. Stanley made them, and they were sold as regular torx screwdrivers, but they have the hole for the security pins.

Xiaou2:


 If you are good... you can also carve a slot for a flat head screwdriver in the screw by using a dremel.

 Or... sometimes if the screw head is not too deep... you can use a visegrip locking pliers to grab the head and turn it.

 


Pages: << < (2/2)

Go to full version