Main > Monitor/Video Forum
I NEED HELP!! CONNECTING EYGO MONITOR TO ARCADE!! WHAT WIRES MEAN WHAT???
yamaha147:
Hi,
I just bought the Mortal Kombat arcade and got a Eygo 19 in monitor
to try to connect together in the cabinet. I don't know what I'm
doing!!! There is a green, white, red, orange, yellow, blue, black,
gray, and purple wires coming from the monitor. From the game board
comes a red, green. brown, black and white wires. I
dont know what to connect to what..I dont have a manual either so I cannot find out what wire is what.. Can anyone please help me
at all???email me at yamaha147@copper.net
Thanks alot-Brian ??? ???
SNAAAKE:
haha..very funny..
whats you eygo monitor?
if its vga only then no way to play your board...unless you get real cga/ega arcade monitor with r/g/b/sync/ground wires coming out of the monitor.vga wont display your jamma pcb.
thats all i know.
BobA:
I can help with the Mortal Kombat cabinet wires for Mortal Kombat 1
White - Sync
Red - Video Red
Green - Video Green
Brown - Video Blue
Shield(Black) - Ground
Snaaake is right on.
These are standard arcade monitor signals so won't work with your Eygo if it is a vga monitor. Perhaps you could provide a model number or some other info on the Eygo.
If you Eygo is a vga monitor you could probably build a MAME machine by adding a PC and Jpac and emulate MK1.
BobA
yamaha147:
The Model is AMN19V-RB
Hope this helps!!! Let me know if you need more info...Thanks-Brian
BobA:
Did a google search and got these specs for that monitor. It is vga and will not display the output of your MK card.
These are Eygo 19" arcade monitors being sold on
eBay recently.
Specs:
Power Supply
Switch mode power supply
Dual AC input range
Jumper selectable
No isolation transformer required
Input Signal
Video - RGB analog, positive, 0.7 Vp-p.
Impedance - 75 ohms, terminated.
Rise Time - less than 25 nanoseconds.
Bandwidth - DC to 25 MHz (at - 3dB), mode 3.
Resolution - Model
1. 640 x 350 (70Hz refresh)
2. 640 x 400 (70Hz refresh)
3. 640 x 480 (60Hz refresh)
Sync. - TTL, positive or negative. Monitor circuitry will
automatically determine and adjust for VGA Horizontal Scan - Frequency 31.5KHz nominal
Capture range-30.5~32.5KHz
Active video - full width display of video
signals with active video from 25 to 28usec.
Linearity - plus or minus 5%
Vertical Scan - Frequency 60/70Hz
Capture range 47~85Hz
Linearity - plus or minus 5%
Picture Size Regulation
2%
Geometric Distortion
plus or minus 1.5% (max)
Environmental Conditions
Temperature 100 ~ 550C
Humidity 10~90%, no condensation
High Voltage
13"=23KV, 20"=25KV, with integral X-radiation
Shut-down protection
Degaussing
Automatic, operating at beginning of each power-up
cycle, provided the monitor has been turned off for
at least 20 minutes.
BobA