| Main > Main Forum |
| Happ optical to Opti-Pac problem |
| << < (2/2) |
| MostTornBrain:
Bingo!! We have a winner! Thank you for your insight, Rebel! When you mentioned a short, I decided to look over the board again. It is mounted on a metal bracket in the rotational joystick assembly provided by Happ. One of the surface-mount resistors was making contact with the edge of the metal bracket. It looks like the holes for the screws are out of alignment. Funny thing is, both my joysticks have this same problem. As a quick test, I removed the board from the metal bracket and it all works perfectly! I'll just put some nylon washers between the board and the metal bracket and that should take care of the short. Thanks again! This problem had been driving me nuts. Now I can go to sleep. :-) |
| Navigation |
| Message Index |
| Previous page |