| Main > Main Forum |
| Soul Edge button problem. |
| (1/1) |
| BLACK KNIGHT:
I have a Tekken 2 arcade machine and I recently bought a Soul Edge board off of ebay. They both have a System 11 board so it's suppose to be a perfect swap. However there is 1 button a kick button that doesn't work on Soul Edge. I made sure to plug the kick harness into the Soul Edge PCB. I plugged Tekken 2 back in and all the buttons work fine. Could the kick harness for the Soul Edge PCB be wired differently? I thought it was standard like the JAMMA harness. |
| purplec:
i currently have this problem im starting to think its different kick harnesses required any chance you could confirm |
| DJ Infinity:
Hmmm, Having a Tekken Tag & a Soul Calibur on the way this should be interesting. Anyway try this I noticed this on my Soul CAlibur II & Tekken IV setup the buttons are NOT identical. They could be other places on the kick harness. If you can try different pins and see what you get. |
| paigeoliver:
Check the pinouts, I seem to recall Soul Edge was funky about the 4th button and I remember doing some trace cutting and soldering action on mine to make it work the same as the rest of my boards. |
| Navigation |
| Message Index |