| Main > Main Forum |
| Can I use short leaf-based buttons on my 3/4" MDF CP? |
| (1/1) |
| wakerlet:
I know this is a silly question but I have the opportunity to get some short clear translucent leaf buttons and wanted to know if anyone has gotten these to work with a 3/4" control panel. Thanks, Todd |
| daywane:
yes but you will need to cut out some of the wood. The first one I did was simply use a large spade bit and drill out most of the wood from the back. I made 3 drill cuts ( not going all the way through) the flip the cp over and drill you button hole. short and dirty but works. |
| Navigation |
| Message Index |