| Main > Main Forum |
| So wich paint is the best way to go? |
| << < (6/7) > >> |
| Mameotron:
The most creative plate I have ever seen was on a volkswagen bus in California. It was "p34p3p". Upside down, with the font California used in the 80's, it spells dedhed!! |
| giskiwi:
--- Quote from: darktemp on September 12, 2004, 10:45:59 am --- --- Quote from: danny_galaga on September 12, 2004, 03:38:59 am --- if you use oil based primer, then you should really only use oil based paint on top, whereas you can put anything over water based primer. --- End quote --- I was under the impression that it was the other way around. Oil primer can be coated with either but latex primer can only have a latex topcoat? Fact is either way would probably work just fine but maybe someone can clarify. --- End quote --- Having worked in a paint shop for six and a half years, although this was a few years ago, I would tend to disagree with the quote by danny_galaga. Generally, any paint can go over any primer - water over oil and oil over water - or so I was taught here in NZ. As for the paint types: Acrylic/Latex/Water-base are all water-thinned; Alkyd/Enamel/Oil-base are all turps-thinned. Apart from these types, there is also lacquer (as previously noted by another poster), automotive and marine paints. In the city where I live, a local joinery company has used automotive paint on kitchen cabinets, with great results. Hope this helps. giskiwi AFTERTHOUGHT: water-base/acrylic is preferable as primer on mdf, oil-base/enamel can soften and degrade the glues etc used in the manufacture of the mdf. |
| rampy:
also of consideration... but not mentioned/asked... what "finish" flat, eggshell, satin, semi-gloss, glossy, etc... That can have a more profound effect on the finished look (besides how it's applied and how well the surface is prepared <--- important) than if it's oil based or water based... *shrug* IMHO anyways... rampy |
| PedroSilva:
--- Quote from: monkeybomb on September 11, 2004, 08:02:47 pm ---water based primer is useless on MDF. use a primer with a different base so your paint options grow. --- End quote --- Alow me to disagree .... ;D I used water based primer and paint on MDF ... here see for yourself the results ... http://www.arcadecontrols.org/yabbse/index.php?board=10;action=display;threadid=13087;start=40 |
| chasmosis:
I just saw this license plate the other day. W0DFK The second character was specifically a zero, it had a slash thru the center. Took me a little bit to figure it out. It makes more sense when you remember that some people use the word "ought" for the zero (hint: WTF). Here and I thought they made you explain the reference on personalized plates in my state. |
| Navigation |
| Message Index |
| Next page |
| Previous page |