| Main > Lightguns |
| Light Gun Interface |
| << < (15/15) |
| Silver:
I believe he is still planning to look into this. I was asking him for details of the system. I thought recently of getting hold of the gun setup (the sega one) to have a look as there is a pile of equipment at my work which would be quite handy for this. However, I've not seen any on ebay and the parts I've seen are not very cheap. (I was only after the gun sensor and monitor mounted infra-red LEDs (although technically you need 10 or 12 LEDs + 2 gun sensors (2 guns)...) If anyone has info on where to get these cheap I would LOVE to know so I could take a look..... However, the reality is that the parts look and probably are very basic and cheap to make, and all the processing is done on the game boards themselves. So in Reality anyone looking at this is basically starting from scratch and will need either a driver or interface chip to process the raw data. If Andy pursues this, which i hope he does, he hopefully will be at an advantage as he already has experience in interfacing raw analogue data via his Cypress microcontrollers (ie the Optipac). |
| M3talhead:
--- Quote from: Silver on February 27, 2005, 06:11:44 am ---...If Andy pursues this, which i hope he does, he hopefully will be at an advantage as has experience in interfacing raw analogue data via his Cypress microcontrollers (Optipac) --- End quote --- .....further establishing himself as a MAME legend..... |
| Navigation |
| Message Index |
| Previous page |