Main > Main Forum
Where to get wire harness for Mini-Pac
<< < (2/2)
Searcher7:

--- Quote from: microwrx on August 30, 2004, 04:01:11 am ---Alternatively you could get a terminal block/strip, wire the IDE cable you have to one side and the button/stick wiring to the other side just like on an I-PAC.

--- End quote ---

A someone elaborate on what a "terminal block/strip" is, and where to get one?

Thanks.

Darren
miles2912:

--- Quote from: Searcher7 on July 24, 2006, 11:30:54 am ---
--- Quote from: microwrx on August 30, 2004, 04:01:11 am ---Alternatively you could get a terminal block/strip, wire the IDE cable you have to one side and the button/stick wiring to the other side just like on an I-PAC.

--- End quote ---

A someone elaborate on what a "terminal block/strip" is, and where to get one?

Thanks.

Darren

--- End quote ---


Here is a link to one at radio shack
http://www.radioshack.com/product/index.jsp?productId=2103229&cp=&origkw=barrier&kw=barrier&parentPage=search

You can see my minipac just below the trackball and the barrier blocks to the left and right of it.  They worked out great.



D-
Navigation
Message Index
Previous page

Go to full version