Main > Main Forum
Wico leaf buttons - followup
(1/2) > >>
ericball:
As noted in my previous posts Mounting leaf buttons in wood and Any good Wico experiences? I ordered some leaf buttons from Wico.  I now have them in my posession and can give some details.

The buttons are 1 3/4" long with a 7/8" thread, so I think they qualify as long buttons.  The leaf holder (black, though the order slip indicated white) has a 1" diameter 1/8" high spacer.  But if the spacer is set in the hole (3/4" wood) then the bottom of the plunger just rests against the leaf switch.
RayB:

 OK
FractalWalk:
But if the spacer is set in the hole (3/4" wood) then the bottom of the plunger just rests against the leaf switch.

I had the same issue. You're going to have to make yourself some spacers. I used washers and it worked for me.
FractalWalk:
The buttons are 1 3/4" long with a 7/8" thread

I think those are the short ones. The long ones are supposed to be 2".  
ericball:
Just a picture of the button (not pressed) mounted in 3/4" wood (1 1/8" hole).
Navigation
Message Index
Next page

Go to full version