Main > Main Forum
Buck rogers cab dimesions
atari2600chick:
I was wondering if anyone has measurements for a buck rogers sit down cab. I have read other threads and found the following measurements (which have been very helpful - thankyou!!)
QUOTE: Started by Felsir, Message by Rocky
Here's the measurements for the Buck Rogers sit down:
(I used Tailgunners' drawing)
A: 9.5" in front, 8.5" at the back
B: 16.25" to the base of the pedal, 25.5" to the end of the floor area
C: 19" (but the CP has a trigger stick)
D: 27.5"
E: 3"
Sorry I don't know how to post the pic/or the thread/s that goes with this post.
I was wondering if anyone had any other measurements like:
length,
depth
and height of the cab
dimesnions of monitor enclsoure (ie height from D to top)
arm rest side dimensions
I think I would like to base a driving cab on a similar design, so any help any one could give would be much appreciated ;D
Thanks :)
Jakobud:
I might be able to help you, if I can find someone online who is willing to measure it for me. Give me a few days.
By the way, are you talking about the fully enclosed cockpit?
atari2600chick:
I wasn't referring to the enclosed cockpit. There is a cab that has the monitor enclosed and seat attached. I will try to add a pic.
Jakobud:
Ah, this one
That one is a little more rare I think, but I'll still look around.
Rocky:
I have a Buck Rogers sit down (not enclosed) that I'm working on.
IMO it is ideal for a sitdown cab design. It is really 2 pieces. The seat is small and light enough that I can lift it by myself and carry it (not recommended for stairs). The monitor / PCB / CP section is about the size of a Mini-cabinet.
atari: I'll get the measurements you asked for and post back here.
Rocky