Main > Main Forum

I have the minipac and how i have questions!!

Pages: (1/3) > >>

PixelCloud:

ok

so i have the minipac usb with the trackball and spinner option

so!

1) what jumps should i use for the minipac? i cant find docs on this
2) when i plug it in to my computer it says that it idnt detected and such (do  i need to have all the buttons hooked up for it to be detected?) also when i have a keyboard hooked up to it it will have power but wont work i windows (i can press num lock and caps lock etc etc and the elds will go on)
3) with some jumper settings the mouse will stop working..

Quazi:

I am pretty new to all of this, but I recently put mine together (mostly anyway) and I had that same problem.

By default the jumpers are not set to USB. This pic actually is the correct way to set up USB:



In other words, the left jumper is at the very top, the right jumper is at the bottom.

Hope that helps..

PixelCloud:


--- Quote from: Quazi on August 20, 2004, 12:23:20 am ---I am pretty new to all of this, but I recently put mine together (mostly anyway) and I had that same problem.

By default the jumpers are not set to USB. This pic actually is the correct way to set up USB:



In other words, the left jumper is at the very top, the right jumper is at the bottom.

Hope that helps..

--- End quote ---

ahh thanks man


stupid me!

microwrx:

Could have left this in your other Mini-PAC thread, doesn't matter.

Anyway, remember all the MKI boards are the same.  There are only 2 jumper settings:
USB/PS2
ALT/MAME (or is it ALT/ROM)

For you, use USB.  Ther is no point even trying PS2 unless you plug it into the PS2 keyboard port on your motherboard which you'll need a PS2 to PS2 cable for (is the cable it came with PS2 to USB or PS2 to PS2 with a USB adapter on the end).  Rmember in USB mode you can not connect a PS2 keyboard using the passthrough connector, you will have to use either another USB keyboard or have your PS2 keyboard plugged into the motherboard itself.

Does the PC detect it at all?  Is there anything in control panel under USB devices?

PixelCloud:


--- Quote from: microwrx on August 20, 2004, 12:37:36 am ---Could have left this in your other Mini-PAC thread, doesn't matter.

Anyway, remember all the MKI boards are the same.  There are only 2 jumper settings:
USB/PS2
ALT/MAME (or is it ALT/ROM)

For you, use USB.  Ther is no point even trying PS2 unless you plug it into the PS2 keyboard port on your motherboard which you'll need a PS2 to PS2 cable for (is the cable it came with PS2 to USB or PS2 to PS2 with a USB adapter on the end).  Rmember in USB mode you can not connect a PS2 keyboard using the passthrough connector, you will have to use either another USB keyboard or have your PS2 keyboard plugged into the motherboard itself.

Does the PC detect it at all?  Is there anything in control panel under USB devices?

--- End quote ---

its working now..

just my stupidity

Pages: (1/3) > >>

Go to full version