| Main > Main Forum |
| CPO |
| (1/1) |
| Trimoor:
I took the top layer off my control panel, and this is what I found. Now what do I do? I would like to make my own custom control set, but there are so many holes in the metal. Should I try to fill in the holes? Should I have someone make a new one from scratch? Should I ignore the holes, and just cover it with plex? This is the cab i'm refering to: http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=23330;start=msg190208#msg190208 |
| RayB:
Aw man that's too bad. I like Assault! ;-) |
| Trimoor:
Here is a high-res pic: http://www.trimoor.com/temp/assault.jpg |
| NoOne=NBA=:
What controls are you wanting to put in it? |
| Trimoor:
most likely a trackball, spinner, joysticks, and buttons. I might omit some if there isn't room. I just read oscar's CP restoration guide, and it looks promising, but could I drill new holes through the fiberglass and metal? I'd have to get a welder too... What should I do with the assault overlay? Is it pretty much useless? |
| Navigation |
| Message Index |