| Main > Main Forum |
| creating a curved surface? |
| << < (2/9) > >> |
| old school gamer:
This might help. |
| PixelCloud:
hmm i look into somethign like that if i could post a autocad file i wouls show ylou what i mean |
| crashwg:
just change the extension of the autocad file to .txt and attach it with a note that it is not infact a .txt file. |
| Tailgunner:
What I've done in the past is to grind 1/4" plywood down till I had enough flexibility to form the curve. I'd then build up the required thickness using layers of plywood. I had the plywood ground down at a cab shop. It cost me a six-pack to have it done. ;) |
| Jakobud:
You can also bend wood by soaking them in water or some liquid. Lookup that Homemade Backyard Monorail that one guy made. A lot of his track is bent wood that he did by just soaking the wood planks in a kiddie pool or something, then bending them and clamping them into a certain position for a while, then after a period of drying time, then stay bent in that same position. |
| Navigation |
| Message Index |
| Next page |
| Previous page |