| Main > Main Forum |
| Minipac... |
| << < (3/6) > >> |
| DvMxDv:
Love to. Unfortunately I haven't gotten any response yet on my e-mail. Am I right in assuming that based on Andy's statement above "for the current batch of MkI Mini-PACs, all boards are the same" that I can use a Minipac Basic to connect my 2 player control panel along with the Ultimarc trackball that I recently purchased? Or is there a difference between the standard and opti other than an additional harness? I understand that I'll need to use the USB connection rather than PS/2 and that I'll need to use an IDE ribbon cable for the connections with the basic. Thanks to anyone who can help me with this one. Dave |
| microwrx:
My understanding is you are correct. All the MKI boards are the same and it's only the harness that is different so if you have your own IDE cable and Andy's wiring diagram you should be fine. |
| DvMxDv:
Thanks for the reply, microwrx! I'll try to confirm that with Andy when I order this week... |
| DvMxDv:
No response from Ultimarc on my e-mail, but that's probably the fault of the poorly run M$ Exchange server that my company uses... So I guess I'll ask here. What does Ultimarc use to adapt the Minipac to USB? Thanks. Dave |
| Bgnome:
"Dual interface USB or Keyboard - just swap the cable and change a jumper." so im guessing its a straight-thru cable with a mini din on one side and a usb on the other. maybe someone can confirm this.. |
| Navigation |
| Message Index |
| Next page |
| Previous page |