| Main > Main Forum |
| How can I smooth the trackball plexiglass hole? (ouch! it's sharp) |
| << < (6/7) > >> |
| ThePaul:
Sofa, My TB mounting kit came with a spacer. I did not use it. The lip and the Lexan were exactly the same height/thickness. So once I cut the hole in Lexan (using TB hole - 3" as a guide) the lip itself fit up into the Lexan. See There is no gap at all between Lexan and trackball lip, well maybe a microscopic one, but nothing that you can feel. Also it seems that if you don't use the spacer your TB will be sitting higher.. which IMO is nice. |
| foomench:
As for grit, I think the original thread said to start with something rougher (not rough, however, by sandpaper standards), maybe 200, and finish with really fine, like 400. For polishing, I found my Home Depot had a Dremel kit for about $12 that included the polishing compound, numerous cloth attachments, and some other cleaning attachments. I bought this, but haven't used it yet. -foomench |
| Witchboard:
--- Quote from: sofakng on August 10, 2004, 02:56:47 pm ---I'm posting from work... I can't post any pictures but I haven't beveled anything yet. When I cut the hole in my plexiglass I cut it exactly 3". So, if everything works OK then when I remove the spacer the trackball will be raised and fit through my plexiglass hole. I will be THRILLED if this works.... :) --- End quote --- Oh.. I thought you had already bevelled your edge. Plan to be thrilled then. ;D |
| sofakng:
It worked PERFECTLY!!! Ok, maybe not perfectly, but pretty darn close. The trackball lip fit perfect into my plexiglass hole making it *nearly* flush. It's still a tiny (very tiny) bit below the plexiglass but it's 10x better than the way it was. I also sanded the plexiglass trackball hole. I only did the flat part, not the edges. I know I probably didn't need to do this but I figured what the heck. I'm very very happy with the way it worked out. Thanks for all the help! |
| KrawDaddy:
BTW you should always finish your lexan with 2000 grit wet sanding! Try it |
| Navigation |
| Message Index |
| Next page |
| Previous page |