| Main > Main Forum |
| EL cable in T-Mold trench? |
| << < (2/3) > >> |
| SoundDoc:
I had the same Idea, contacted T-molding.com and asked about clear molding. They sent me out a piece, and I tried Red, Blue, Green, and white EL wire, none were visable with the lights on, and only the blue and white could be made out in the dark. (plus you have to cut and glue the T-molding in because the wire is over 1/8" diameter). Thought it would be cool too, unfortunatly it doesn't work too well. My new thought and I'm just waiting for for it to show up now is to use 2 strips of 1/4" wide EL tape on either side of the t-molding groove, and then press the clear T-molding in....... ;) sd |
| crashwg:
What about drilling a bunch, and I mean a bunch, of holes along the t-molding groove and putting hi-intesity LEDs in there? It certainly wouldn't give a consistant glow but it probably would look cool... |
| Bgnome:
i know im not the first, but i plan on using rope lights for basically the same effect.. |
| Hoagie_one:
use fiber optic cable. never goes bad. |
| Famicom Arcade:
I want to hear peoples opinions on what the BEST kind of glowing wire is seeing as how people on this board use it and I want to buy some at some point for my cabinet :). Thanks |
| Navigation |
| Message Index |
| Next page |
| Previous page |