| Main > Main Forum |
| Cleaning surface after painting/sanding |
| (1/1) |
| Sylentwulf:
OK, before priming, and after sanding in between coats, how do I clean the surface? Shopvac, towel? Some is MDF so I don't want to wipe with any kind of liquid... Thanx! |
| Heartburn:
Tackcloth might work. It's a sticky (but not moist) rag used just for this sort of thing. It should be easy to find. |
| greywolf22:
Yup I used a few tackcloths and it worked like a charm. I was able to find it with the painting supplies at my local ACE hardware. Very sticky and works great |
| rdagger:
Compressed air works well. If you are using a sprayer, you can disconnect the hose from the gun and blast the surface with air. |
| Navigation |
| Message Index |