| Main > Main Forum |
| ultimate arcade II additional strength? |
| << < (2/3) > >> |
| Sylentwulf:
The only thing I plan on doing very differently, is getting rid of the keyboard shelf, using 1*1" pieces for ALL screws instead of screwing from the outside and filling tons of screwholes, adding 1-2 2*4"s for additional strength/support. I also made the bottom 3 inches shorter to fit my height, and the control panel shelf 1.5" shallower to fit my control panel. A couple of the other pieces front and back are going to be miter-cut, and shaped to make a little more sense as well. |
| clanggedin:
Make sure you add more supprt on the bottom if you plan on standing in it at anytime. I stood in mine and cracked the wood a little (particle board). Nothing big though, but it sure gave me a scare. |
| Madman:
Ok tomorrow I will post some pics with detail of the guts...any particular things anyone is interested in? |
| ras2a:
Ok thanks a lot guys - appreciate your input. I saw some cool L 'type' brackets on this board a while back but now I can't find the post. They aren't actually 'L-Brackets' and they look a lot stronger...I was thinking maybe using them to strengthen. Or maybe I'll just use some blocks of 1"x1" pine etc like you guys have? Thanks again Craig |
| Sylentwulf:
If you want to go with L brackets, go to the decking section of home depot, and get the real heavy duty L brackets with 4-6 holes in each for screwing. They're around $.40 each and WILL NOT BEND. I plan on using some of these here and there (like the monitor shelf) And yes, more support on the bottom especially if you plan on using casters. |
| Navigation |
| Message Index |
| Next page |
| Previous page |