Main > Main Forum
T-Stick Plus Dust-Washer and Mounting.
<< < (2/5) > >>
Witchboard:
Okay, I forgot that the ball tops weren't standard.  :-[  Yes, the balltops is what I was talking about.  Unfortunately the ball tops seem to be melted onto the shaft instead of threaded like the J-Stick.  I guess my original question still stands... but I doubt that anyone has mounted the dust washers under the plexi with the ball tops.
DennisInMN:
Hmm, interesting.  I only have the stock bat style, as you can tell from my previous post.  I wonder why the ball tops are made this way?
Lance:

--- Quote from: Witchboard on July 20, 2004, 01:18:13 pm ---Okay, I forgot that the ball tops weren't standard.  :-[  Yes, the balltops is what I was talking about.  Unfortunately the ball tops seem to be melted onto the shaft instead of threaded like the J-Stick.  I guess my original question still stands... but I doubt that anyone has mounted the dust washers under the plexi with the ball tops.

--- End quote ---

I'm fairly certain that they are threaded, ultimarc just uses a liberal amount of thread locker on the ball tops.  
Grasshopper:
My understanding is that the ball tops screw on but Andy fixes them in place with sealing compound so that the lift and turn 4/8 switching mechanism can work. You could probably get the ball top off if you were determined enough.

Personally if I was buying a T-Stik+ I would ask for the ball not to be glued in place.
patrickl:
You need the top to be fastened pretty well otherwise it will come undone too easily when switching from 4-way to 8-way.
Navigation
Message Index
Next page
Previous page

Go to full version