Main > Main Forum

T-Stick Plus Dust-Washer and Mounting.

Pages: << < (3/5) > >>

Witchboard:

Thanks everybody for the info.  I'll email Andy when I get home.  Just to be safe.  Don't want to end up splitting my ball top or anything.  

jcoleman:

I've found that the dust washer only moves minimally (it's negligible, really) when the joystick does.  Therefore, assuming you get the hole centered perfectly around the shaft, you could drill a hole the size of the ball (slightly larger, I guess) and still not have to worry about exposing the inside of the panel.  Note that I have not tried this myself.  Now if anyone's been able to modify a Wico balltop shaft to fit a T-stick...that's something I'd be interested in...wonder if the command and control sticks could be modifed, since they are longer...hmmm...

Coleman

NoOne=NBA=:


--- Quote from: Witchboard on July 20, 2004, 03:09:53 pm ---Don't want to end up splitting my ball top or anything.  

--- End quote ---

If you DID split your balltop, and then glue/tape it back together, it would be more arcade accurate though.

Witchboard:

Heh, yeah, then all I'd need is some cigarette burns to complete the look.  ;D

Witchboard:

Just for the record if anybody else was looking for the answer:


--- Quote ---The ball is threaded on, with Loktite thread lock. It should be possible to remove it by using a strap wrench. When replacing it, you could use epoxy if you don't have Locktite. This just needs to hold it for the 4-8 way switching.
--- End quote ---


Pages: << < (3/5) > >>

Go to full version