| Main > Main Forum |
| Help with attaching/securing smoked glass to cabinet |
| << < (3/3) |
| Soulcon:
Two things I did are this but the third is completely optional. ;) First I measured the space and I cut the plexi a little bit to big so I would have to give it a little love to get it in. Basically a press fit! Thats step one. Second I went from the back side and used a glue gun and ran a small bead of glue around the back side to give it a nice seal. I used black glue it is avalible for pretty cheap. Third I bought 2 very small in diameter dowels. I then cut them in half (Carefully) and mounted them one on top and one on the bottom of my cab also with a glue gun. The plexi is't gonna move anytime soon. You can just do the dowels if you want and use some brads if you don't want it to stay that way as well. -Soul |
| Navigation |
| Message Index |
| Previous page |