Main > Main Forum
Securing Lexan to Control Panel
rdagger:
I used screwposts.
http://www.screwpost.com/
Brad Lee:
Thats the same thing I got above. Never really imagined there would be an entire company dedicated to that single item :)
big_garryb:
maybe im alone in this - but i found that my buttoms screwed down were secure enough to hold the plexi down. to t-mold around the edge was fine too. everything is secure with no flappy bits.
garry
Chris:
In my old CP I used #8 screws with finishing washers. On my current CP I just let the buttons do the work.
--Chris
pathdoc2:
I paint my lexan control panels from underneath with paint desinged for painting lexan remote control car bodies. After paint dries I epoxy to control panel surface. You could just as easily put a bolt in each corner and allow the buttons to hold the lexan in place.