Main > Project Announcements
The Gold Mine
Mameotron:
Not trying to speak for KrawDaddy, but here is one way of doing it.
Use a flush cut laminate router bit. In the picture, the roller bearing rides along the wood (yellow) and cuts a perfect copy on the laminate (black).
It does cut an exact copy, so your original holes need to be really good. Of course, everything KrawDaddy does looks to be really good!!
patrickl:
Wow I love those pinball holes. I'm designing a removable CP where the pinball buttons would be inside too (sort of). The idea is to also incorporate a tilt sensor (the part with the buttons should be able to move around a bit and sense motion). Basically like the pinball controllers you can buy for your PC.
I'm also going for a pinball plunger. Are you using a plunger too? There were some threads earlier on how to hook that up.
KrawDaddy:
Whooo Hoo it fits perfect!!!!!!!!!!!!!!!!!!!!
what a relief.
Cameras a little dirty.
Iam going to mask off the circular area over the monitor and spray paint the underside black to hide all wood areas.
KrawDaddy:
heres how the back worked out.
Witchboard:
Fits like a glove. ^_^ Good work.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version