Main > Main Forum
Cabinet almost finished - MAJOR PROBLEM #2 - (cpanel w/t-nuts) - I'm at wits en
<< < (4/4)
ThePaul:
sofakng what kind of joysticks are you using?
FractalWalk:
Can I just drill the hole for the shaft a little larger that way it will definitely fit OK?

Yes. The T-nut relies on the top lip and the spikes fastening to wood. The shaft of the nut does not have to be snug against the hole.

However, they are made standard sizes (i.e. to match drill bit sizes) so you shouldn't need to do this.
JAMMA Guy:
Just out of curious ... what happens to this CP???

sofakng:
ThePaul:  I have both Super's and P360's.  I'm going to use the P360's but with the springs from the Super's.  I really don't know which I like better, but most people suggest the P360's for fighters (which I plan to start getting into).

Jamma Guy:  That's a 100% temp/test control panel.  The ONLY reason I built that was to test out the supers vs the p360s and to be able to play MAME a little bit while I work on the rest of the cabinet.  There is no artwork for anything for that control panel.  Please disregard it  :)
Navigation
Message Index
Previous page

Go to full version