| Main > Main Forum |
| multiple spinners on cocktail |
| (1/2) > >> |
| btoddkelley:
I built a cocktail that has the two normal control panels as well as a side panel. I have trackballs and spinners on all three panels. I am using an optipac, however this set up will leave me one axis short. (3 trackballs at 2 axis each and 3 spinners will total 7 axis.) The optipac supports 6. I have built cabs like this before and used a small toggle to switch between player one's spinner on the side and end panels. I really do not like this approach. I was wondering if any of you had any ideas to eliminate the switch. Thanks Todd |
| NoOne=NBA=:
Ummm.......3*2=6, and 3*1=3. That's NINE. You're going to fill the Opti-pac with the trackballs alone. The switch method is the easiest approach. You could add a couple mouse hacks to this, but I don't see any reason to when you can just switch controls on the interface you've got. |
| sirwoogie:
NoOne is right, that is 9. Instead of a workaround, why not just buy another optipac? |
| NoOne=NBA=:
I knew that 16 years of school I had would come in handy some day. |
| btoddkelley:
M.A. in economics and i cannot do basic math! Yes, 9 axis. The optipac has 8 axis inputs so i only need one more. Thanks Todd |
| Navigation |
| Message Index |
| Next page |