Main > Main Forum
Final order from Happ's -- please read!
spystyle:
--- Quote from: sofakng on July 06, 2004, 09:58:00 pm ---Now the problem is that it's a very small area between my bezel and the edge of the speaker panel (where the retainer will go).
I'm using 6 1/2" speakers and the grills are quite big. However as long as the retainer doesn't go IN too far I should be ok.
--- End quote ---
Because the Happ marquee retainer is plastic you can shape it to match the speaker grill with a grinder.
Dig it ?
Craig
sofakng:
Good idea, but if it's only ~ 0.5 inches then I don't have much to sand... If I sand it too far it won't be able to stay on the speaker shelf, right?
Also, I followed your advice Spystyle and called Happ's to request cheaper shipping. That lady at their sales department is SUPER friendly. She said I wouldn't have insurance or a tracking number, but if I wanted USPS Priority Mail it wouldn't be a problem what-so-ever.
Any idea how long priority mail usually takes? I'm guessing 3 days or so? from IL to PA?
mp2526:
sofakng
I just returned your email.
As far as the coin return artwork. I suggested in the email that you print your own. You can take apart the return button and pull out the old one and replace it.
On the coin sticking issue, is it just one coin or have you tried several. Is it getting stuck before it actually drops in the coin mech or while in the coin mech? What type of coin are you using (I assume quarter)?
Chris:
Oscar has some coin artwork in his gallery:
http://www.oscarcontrols.com/gallery04.htm
There are also reject inserts in the thread at:
http://www.arcadecontrols.org/yabbse/index.php?board=13;action=display;threadid=19727
I printed mine on regular paper. Real ones are on thin mylar, and are not transparent. You can buy just the mylar inserts from Happs if you like; see http://www.happcontrols.com/cc/42008400.htm . Minimum quantity is 10 inserts, though.
--Chris
sofakng:
--- Quote from: mp2526 on July 07, 2004, 10:35:28 am ---sofakng
I just returned your email.
As far as the coin return artwork. I suggested in the email that you print your own. You can take apart the return button and pull out the old one and replace it.
On the coin sticking issue, is it just one coin or have you tried several. Is it getting stuck before it actually drops in the coin mech or while in the coin mech? What type of coin are you using (I assume quarter)?
--- End quote ---
Thanks for the e-mail. I've sent you another e-mail and I'll e-mail you some pictures later (and I'll post them to this thread as well if I remember)
I've tried several coins and they all seem to get stuck on the right-side coin slot. They seem to get stuck right after they go through the coin return button. So I think it's getting stuck just as it's entering the coin mech? Does that sound right?