Main > Main Forum
Final order from Happ's -- please read!
sofakng:
I'm getting ready to place my final (hopefully!) order from Happ's controls...
Here is what I'm going to buy:
1) Extra buttons
2) Marquee Retainer**
3) Coin door replacement buttons**
Here are my questions...
Marquee retainer: What else do I need to purchase besides the actual marquee retainer? Does it include both the top and bottom pieces?
Coin door replacement buttons: I got a used coin door that has coin return buttons that say "$1.00 [4 quarters]". It accept quarters, but the coin return button says $1. I'd like to purchase ones that simply say 25 cents. Also one of the coin slots seems to get jammed when I insert a coin. Can I simply adjust something or if I replace the coin return will that replace that mechanism as well? Is this the coin mech I'm replacing?
FractalWalk:
The retainer comes in 2 5' pieces that you cut to fit.
SirPeale:
I'd suggest getting some plastic corner molding instead of the marquee holders. Shipping will eat you alive.
sofakng:
Well, the bezel I finally received from them had a crack in it. When I ask for a replacement tomorrow I'm going to try to get free shipping for all the extra stuff I want to order.
In case they still charge me... does Happ's sell those plastic corner pieces?
As for the coin return buttons... which one would I need from here:
http://www.happcontrols.com/cc/420517xx.htm
My coin door is a standard Happ's door. However, it seems as though all of the Happ's coin return buttons say "HAPPS" on them. Do any of them just say ".25 cents" without the darn Happs logo?
sofakng:
Oh, also... I might have another problem...
On the speaker shelf, how far in is the bottom piece of the marquee retainer?
Here is my problem...
The speaker shelf will have a marquee retainer on the end of it, then will come my speaker grills, then will come my bezel.
Now the problem is that it's a very small area between my bezel and the edge of the speaker panel (where the retainer will go).
I'm using 6 1/2" speakers and the grills are quite big. However as long as the retainer doesn't go IN too far I should be ok.
Anybody know the exact distance?