Main > Main Forum

Ball top for perfect360?

Pages: << < (2/3) > >>

CJK:

SlikStik makes ball-tops for most of the popular joysticks, including the Perfect 360.

http://www.slikstik.com

-- Chris


Grasshopper:

The Wico balltops are an exact fit. Ponyboy is selling them for $8.00.

rdagger:


--- Quote from: darktemp on May 28, 2005, 05:05:48 am ---What end of the actuator would you shave off for 8 way operation (narrow or wide)?  I'm guessing the optics read the wide area for 8 way but want to make sure.

--- End quote ---

You want to disregard my prior post about shaving.  After some experimentation, I've found that the 360's can exhibit unreliable performance if you shave the actuators.  The unwanted behaviour only occurs in 4-way mode, but if you ever want to switch to 4-way you are out of luck.  Since the Wico balltop shaft is only slightly to short, all you have to do is press the actuator in (compressing the spring slightly) before attaching the E ring.  Here's an example of my conversion. 

AmericanDemon:

Also you can order from Specialty Plastics...

members.aol.com/specialtyplastic/

Thenasty:

take a look at my site for 360 mods...You can attach a leaf to your 360 for Q-bert Action or 4-way action leaf style for Pacman games.

Pages: << < (2/3) > >>

Go to full version