Main > Main Forum

Mounting T-Stick Plus joysticks...

Pages: << < (2/2)

RecycledPast:

I suggest testing on a scrap piece of wood.  

Last night I tried a t-stick plus (long shaft w/ball top) mounted from bottom of 3/4 MDF and the height was a little lower then I'm used to.  When I mount mine I think I'll route out the wood a little.

I currently use a happs ULTIMATE which has a bat top so that might be skewing my opinion.

SideShow Rob:

Thanks for the input guys...

I will test it out on a bit of scrap 18mm MDF first before I decide.

My favourite joystick from my C64/Amiga days was the Cheetah Bug joystick...which had a very short throw action, and was only about an inch long...so I am guessing/hoping that the height of the T-Stick Plus stick will be fine without resorting to routing...

Should fine out later next week..




NoOne=NBA=:

The long balltops end up a little higher than Crazy Climber height with no routing on 3/4" stock.

I happen to like them that way, so I left them.

I still remember rubbing my knuckles raw playing Crazy Climber in the arcades, so I didn't want them quite that low.

Pages: << < (2/2)

Go to full version