Main > Main Forum

CP help - is this an original concept?

Pages: << < (2/3) > >>

mcdo15:

great idea..
run with it


REBIRTH:

Very cool idea, see no reason why it wouldn't work with a showcase cab.  You will probably have to put stops so the thing couldn't keep spinning around in the same direction over and over.  Good luck!  

NoOne=NBA=:

Hulkster was originally planning something similar to this for his showcase cab, but decided not to.

I like the idea of sandblasted stainless, but I think that lexan over the top would ruin a good piece of art.

RoboG2:

Nice idea johnnysmitch!  I have an idea.  If your up to it, when you build your cabinet, you could make it tilt forward and the turn and tilt back down to turn it around.  That way, the cabinet itself will stop it from spinning and maybe make the function (ability to turn) less obvious to the casual viewer.  Good luck and nice idea!

crashwg:

Only thing that comes to mind that might be a problem would be if someone were to try and use the TB while the CP is in the joystick position that all axis would be reversed.  It wouldn't be too hard to come up with an idea to reversed the axis when it's rotated...

Pages: << < (2/3) > >>

Go to full version