| Main > Main Forum |
| Should I add P1/P2 leds? If so, where? |
| << < (3/3) |
| mattv:
Old atari games used to have flashing p1 start / p2 start buttons so I guess that would be the best place to put your LED's (inside the buttons, should be easy to drill a hole in the bottom and glue them in) Having said that, those stainless LED bezels look so cool it's a shame not to use them The main reason I replied was to say that is one georgeous looking control panel, if it could cook i'd marry it. |
| rdagger:
The CP looks great. You could place the P1 LED on the CP above the P1 joystick and the P2 LED above the P2 joystick at the same height as the P1/P2 buttons. You could go one step further and core out the joystick handles and place the LED's on the top of each joystick handle. |
| Blakey:
Well, I've played hackety hack with a spare button and have worked out a fairly easy way to mount a led inside it without cutting the legs or obstructing anything. Similar to Edgedamage, but with slots instead of holes. So I'll pick up two superbright white/blue leds tomorrow and whack them inside the start buttons. Picked up the smoked glass today, wired up the IPAC last night, tackling the sound issues now and it'll be done by tomorrow barring little niggles like extended tvout/usb cables, replacing all mounting bolts with mushroom head stainless ones, cable tieing all wires neatly.... |
| Santoro:
That is a seriously nice cocktail. Good work! Yet another example that makes me want to learn metalwork! |
| Navigation |
| Message Index |
| Previous page |